"With its unique dry dispersal ventura force system, it is the leading Technology in the elimination of microbes within the environment."
Professor Valerie Edwards-Jones
"It is the only microbiotic cleansing product that requires no vacation of the working environment, unlike other deep cleaning products used in neutralisation of microbes where the environment needs to be vacated for several hours even days during cleansing."
"In effect there is no loss to working time and no need to remove residence or staff with Scent Technologies."
Roy Jackson CEO Scent Technologies
The Product
ST Pro dispersal machine
Scent Technologies’ ST Pro machine is a dry air dispersal and fragrance generator. Being compact and lightweight it lends itself easily both in function and installation to any location. With simple touch-button control, and a robust hardwearing resin-polymer body, it is designed for safe everyday use.
The ST Pro disperses (selected and natural) oil throughout the atmosphere it is placed in. A single unit can sit in a corner of your location and provide immediate round the clock, unobtrusive protection for up to 2 weeks without replacing the oils.
Continual use of the ST Pro is recommended to provide the benefits we have found but should a minor power disruption, relocation or fragrance change occur, the effects of the oils don’t stop. This gives adequate time in most circumstances to reinitialise the ST Pro.
It is the only antimicrobial dispersal product that requires no evacuation of the home or working environment.
In effect there is no loss to working time and no need to remove residents, staff or family when using our products.
How does it work?
The British made machine is a state of the art fragrance generator and deodoriser which disperses a controlled amount of natural oil into the atmosphere without heat or vibration.
This is done by intake of air through the base of the machine. It then directs the airflow by a venturi method over the selected scents which are in the form of natural oils.
This causes a vaporisation of the oil/oils which is blended with the airflow. This blended air is then dispersed from the front of the ST Pro in a unique and dry dispersal method. This process is so fine it is completely dry and leaves no visible trace on any surface.
The ST Pro is easy to use and has a range from 1 to 100% for the output of the chosen scents and oils. The longer the ST Pro is left on the greater the effect in the chosen environment as it follows the natural air flows in rooms and even whole buildings.
Distributing sub-micron particles in a dry dispersal method the natural oils neutralise and sanitise the air thus having the ability to penetrate not only air but also the fabric of a building, its surroundings and contents. The process can have a continued effect which can remain active for days or even weeks after the ST Pro has been switched off.
At maximum output the ST Pro will treat 600 cubic metres of air each hour it is on and has a wide ranging effect very quickly. Even the lightest most subtle scent used in the ST Pro can be recognised within far reaching areas in a matter of minutes once the ST Pro is initialised.
The ST Pro is compliant with all current legislation, including CHIP 3 and R43 Inhalation Risk.
Technical specifications:
- L310mm W318mm H230mm plus power cord to rear.
- Weight ( no oils ) 5kg
- Packaged weight ( no oils ) 6.5 kg
- Nominal power consumption 110W
- Voltage 210-250 VAC ( euro standard ) 100-130VAC available to order.
-
See how the ST Pro machine works.
-
To purchase a wide range of Scents and products please vist our online shop
-
If you have any questions or would like to talk to us please view our contact section